Surface & heat treatment

Commissioned work to change surface finish, protection or material properties by surface or thermal treatment. Geometry-producing precision grinding belongs with machining.

Services from suppliers

459 services

Service
Abrasive blasting
Price on request
Steel-grit and corundum cleaning before paint or metallizing. shared-network envelope: length 18 x width 6 x height 8 m. Network capacity is not allocated to a specific DK site.
By PlusCoat DK A/S
Værkmestervej 7, 5600 Faaborg, Denmark
Service
Abrasive blasting
Price on request
Compressed-air blasting for coating removal and surface preparation.
By 3N Lakering A/S
Industrivej 49, 7700 Thisted, Denmark
Service
Abrasive blasting
Price on request
Preparation of steel and metal components for coating in the Kalundborg blasting cabin.
By Pihl Coating Entreprise A/S
Rynkevangen 5, 4400 Kalundborg, Denmark
Service
Abrasive blasting
Price on request
Surface cleaning using media selected for the substrate, including steel grit, glass beads, soda, sponge, aluminosilicate and garnet.
By Protectors A/S
Dalager 6, 2605 Brøndby, Denmark
Service
Abrasive blasting
Price on request
Steel-grit blasting for subsequent protective coatings.
By DanGard A/S
Kanalen 1, 6700 Esbjerg, Denmark
Service
Abrasive blasting and shot cleaning
Price on request
Abrasive preparation to specified cleanliness and roughness.
By DOT A/S
Grønlundvej 81-83, Fasterholt, 7330 Brande, Denmark
Service
Aluminium anodising
Price on request
Conventional anodising for protective and decorative surfaces.
By Dansk Anodiserings Industri A/S
Pantervej 20, 7700 Thisted, Denmark
Service
Aluminium electropolishing
Price on request
Electrochemical removal of a thin surface layer.
By HAI Horsens A/S
Sverigesvej 9, Horsens, 8700, Denmark
Service
Aluminium heat treatment
Price on request
Hardening, stress relief and ageing for long aluminium profiles.
Service area
Denmark and international customers
By Sjølund A/S
Skamlingvejen 146, 6093 Sjølund, Denmark
Service
Aluminium passivation
Price on request
Conversion coatings for conductivity, corrosion resistance and paint adhesion.
By HAI Horsens A/S
Sverigesvej 9, Horsens, 8700, Denmark
Service
Aluminium pickling
Price on request
P-AL pickling removes welding discolouration and soluble surface contamination.
By Industribejdsning, Nord ApS
Assensvej 4, 9220 Aalborg Ø, Denmark
Service
Aluminium powder coating
Price on request
Coating of aluminium profiles and components.
By VILAK Them
Enebærvej 16, 8653 Them, Denmark
Service
Aluminium powder coating
Price on request
Chromium-free pretreatment and polyester powder coating of aluminium.
By Indulak A/S
Klintevej 6, 8653 Them, Denmark
Service
Annealed cast-iron supply
Price on request
Annealing to alter structure and improve machinability; grade examples EN-GJS-400-15C, EN-GJS-400-18C-LT, EN-GJL-150C-A and EN-GJL-150C. Post-transition processing location/provider requires confirmation.
By Tasso A/S
Frederiksgade 37, 5000 Odense C, Denmark
Service
Anodic sealing
Price on request
Seal anodic pores according to the finishing requirement.
By HAI Horsens A/S
Sverigesvej 9, Horsens, 8700, Denmark
Service
Anodised aluminium colouring
Price on request
Colour incorporated into the open anodic layer.
By Dansk Anodiserings Industri A/S
Pantervej 20, 7700 Thisted, Denmark
Service
Anodised aluminium colouring
Price on request
Organic and electrolytic colouring in HAI Indoor and Outdoor ranges.
By HAI Horsens A/S
Sverigesvej 9, Horsens, 8700, Denmark
Service
Anodising coordination
Price on request
Partner anodising of aluminium parts.
By Hosta Industries A/S
Gørtlervej 1, Hjallerup, 9320, Denmark
Service
Anthracite nickel plating
Price on request
Dark-grey tin-nickel decorative finish, normally over an undercoat; rack or barrel processing.
By Chem-Tec Plating A/S
Kærvejen 13, 7171 Uldum, Denmark
Service
Anti-friction coil coating
Price on request
Application of system-specific coatings for sliding interfaces, gaskets and springs, with performance selected for the application.
By Metalcolour A/S
Agrovej 6, 4800 Nykøbing F, Denmark
Service
Anti-slip epoxy surfacing
Price on request
Qubik NT surfacing for bridges, stairs, walkways and concrete decks.
Service area
Denmark and Europe
By Dancoat Entreprise
Industrivej 4, 6230 Rødekro, Denmark
Service
Automated heat treatment
Price on request
Barcode-controlled heat treatment to T6, T64 or customer parameters; cycle selected for required mechanical properties.
By Jydsk Aluminium Industri A/S
Mørupvej 9, 7400 Herning, Denmark
Service
Ball polishing
Price on request
Drum polishing for a smoother, brighter aluminium surface.
By HAI Horsens A/S
Sverigesvej 9, Horsens, 8700, Denmark
Service
Black electroless nickel plating
Price on request
Low-reflection finish used together with electroless nickel, including internal and complex geometries.
By Chem-Tec Plating A/S
Kærvejen 13, 7171 Uldum, Denmark

Tradebird

How can I help?

Surface & heat treatment

Services from suppliers

Abrasive blasting

Abrasive blasting

Abrasive blasting

Abrasive blasting

Abrasive blasting

Abrasive blasting and shot cleaning

Aluminium anodising

Aluminium electropolishing

Aluminium heat treatment

Aluminium passivation

Aluminium pickling

Aluminium powder coating

Aluminium powder coating

Annealed cast-iron supply

Anodic sealing

Anodised aluminium colouring

Anodised aluminium colouring

Anodising coordination

Anthracite nickel plating

Anti-friction coil coating

Anti-slip epoxy surfacing

Automated heat treatment

Ball polishing

Black electroless nickel plating

Suppliers

3N Lakering A/S

AB Aluminium A/S

ABJ Metal A/S