Powder-metal components, magnetic systems and engineering
Private to you. Nothing is shared with Sintex A/S automatically.
Stainless bearing components with hardmetal surface layers.
View source
Custom insulated-iron-powder components for magnetic applications.
View source
Custom filtration components and magnetic separation systems.
View source
Dry- and wet-running rotor systems with optional hermetic housing.
View source
Engineering, prototypes, measurement and finishing alongside component manufacture.
Sintex sub-brand developing extruded electrical resistance-heating elements for industrial process gases; technology remains under testing.
Price on request
Design and produce sintered or magnetic filters.
Price on request
Engineering support for magnetic systems and components.
Price on request
Measure physical and magnetic properties during development.
Price on request
Develop and magnetize prototype rotors and components.
Price on request
Manufacture complex stainless components by MIM.
Price on request
Manufacture thin-wall shapes using powder extrusion.
Price on request
Press and sinter customer-specific stainless components.
Price on request
Apply wear- and corrosion-resistant coatings to components.
An automotive partner has worked with Sintex since 2000 on four servo-brake versions, including material and design changes and an automated production line.
A calculated STX B7X stator design uses a ferrite rotor and aluminium windings as an illustrative motor-development study.
Joint development with a Danish loudspeaker manufacturer included SMC magnetic components, patent-application cooperation and production.
A design study compares a 0.5 mm laminated-iron stator with a reshaped STX B7X SMC stator, using an 80 mm outer diameter, 20 mm length, six teeth and a four-pole ferrite rotor of 28 mm outer diameter.
A fictional order for 500,000 stator units illustrates material and production-emissions calculations; results depend on the stated weights and emission factors, and the page contains conflicting percentage claims.
Grundfos
A multi-part stamped, machined and welded base was redesigned as a MIM component with ribs, assembly-orientation features and production traceability.
Grundfos
An AISI 316L pump ventilation plug was redesigned from 54.4 g to 17 g and from 27.5 mm to 8.6 mm length, adding traceability and an Allen-key interface.
An unnamed turbine manufacturer used Sintex tungsten-carbide-coated shims to increase static friction in a joint.
Sintex contributed magnet design, materials and manufacturing work to research on permanent magnets for particle accelerators.
A flame trap for a measurement-equipment customer replaced two filters and a machined component with one sintered part.
A liquid-running magnetic rotor was developed with a motor customer and progressed to mass production.
Two particle-accelerator magnet versions were developed with customer Danfysik, alongside the broader Green Magnets research programme.
An R&D coupling with a soft-magnetic inner drive was tested up to 590°C with the outer magnet air-cooled; torque decreased by 15–20% relative to room temperature.
Joint development with FLUX A/S produced SMC pot cores for space-industry components, with 1.8 T saturation and qualification requirements including ESCC 3201/013, MIL-STD-981, MIL-PRF-27 and MIL-STD-202.
ISO 9001:2015
DNV 280588-2018-AQ-DEN-DANAK, Sintex A/S, Hobro. Valid 2025-04-13 to 2028-04-12. Sites: Jyllandsvej 12, 14 and 18 and Sjællandsvej 13. Scope covers powder products, permanent magnets and thermal spray coating, including stainless powder-metal parts and metal injection moulding.
ISO 14001:2015
DNV 280587-2018-AE-DEN-DANAK, Sintex A/S, Hobro. Valid 2025-04-13 to 2028-04-12. Sites: Jyllandsvej 12, 14 and 18 and Sjællandsvej 13. Scope covers powder products, permanent magnets and thermal spray coating, including stainless powder-metal parts and metal injection moulding.
ISO 50001:2018
DNV 10000371998-MSC-DANAK-DNK, Sintex A/S, Hobro. Valid 2023-11-27 to 2026-11-26. Sites: Jyllandsvej 12, 14 and 18 and Sjællandsvej 13. Scope covers powder products, permanent magnets and thermal spray coating, including stainless powder-metal parts and metal injection moulding.
DS/ISO 45001:2018
DNV 280589-2018-AHSO-DEN-DANAK, Sintex A/S, Hobro. Valid 2025-04-10 to 2028-04-09. Sites: Jyllandsvej 12, 14 and 18 and Sjællandsvej 13. Scope covers powder products, permanent magnets and thermal spray coating; appendix includes metal injection moulding, and document also names Executive Order 1409 of 26 September 2020.
Grundfos
Grundfos uses Sintex shafts in bearing systems and provides a testimonial about their service life in its pump applications.
Sintex A/S develops and manufactures powder-metal components and magnetic systems in Hobro. Its range spans stainless steel sintered parts, metal injection moulding, powder extrusion, friction shims, bearing components, filters, permanent magnets, couplings, rotors and soft magnetic composites. Development work includes design and magnetic simulation, prototypes, magnetization and testing. Sintex manufactures polymer-bonded neodymium magnets and sources several other magnet types from specialist suppliers. Founded in 1997 by former Grundfos employees, Sintex belongs to Grundfos Group and has 170 employees. Its powder-metal duplex development remains an innovation activity rather than an established production promise. Additional development includes SMC components for axial-flux motors and passive-power systems, high-temperature magnetic couplings and the HoneyComb industrial electric-heating sub-brand. High Hot and HoneyComb performance remains application-specific and includes research or trial-stage results.
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. Sintex A/S has not reviewed or endorsed it.
Updated Sep 13, 2026
