Metal fabrication
Sheet-metal, welded, milled and coil-formed parts, with production engineering and specified finishing.
View sourceCustom metal components, interfaces and printed electronics
Private to you. Nothing is shared with Mekoprint A/S automatically.
Sheet-metal, welded, milled and coil-formed parts, with production engineering and specified finishing.
View source
Micro sheet-metal and milled parts, plus microturning through the separately identified Microturn group business.
View source
Custom sheet-metal, milled and high-volume enclosures, panels and profiles.
View source
Custom and standard shielding, electrical insulation films and packaging for PCB assembly.
View source
Membrane and silicone keypads, partner-sourced displays, interface engineering and integrated modules.
View source
Overlays, polymer covers, labels, transfers, metal nameplates and instrument scales.
View source
Flexible sensors, electrodes, circuits and heaters, with Danish roll-to-roll production and engineering.
View source
Cable engineering and assemblies supplied through Danish sales and the group’s European production network.
View source
Integrated modules combining housings, interfaces, cables, electronics and shielding.
View source
Novotechnik sensors, Binder connectors and Dremec mounting hardware supplied with technical selection support.
View sourcePrice on request
Cutting, stripping, crimping, termination, labelling and manual/automated harness assembly. Production site, conductor range and testing are agreed for the specific job.
Price on request
Low- and high-pressure moulding, potting and gluing for cables and electronic components, using materials and tooling appropriate to the required protection.
Price on request
Machining of components, heat sinks and profiles using application-specific fixtures, with mounting and finishing options. A universal workpiece envelope is not published.
Price on request
Etching, laser cutting, forming and joining to the electrical and mechanical design; no universal attenuation rating is implied.
Price on request
Sourcing, development, prototyping, assembly, testing and delivery of integrated modules. Manufacturing responsibility for each incorporated component is defined in the project.
Price on request
Coil-based manufacture in 0.1–6 mm material with customer tooling, M2–M12 threading and downstream operations. Production economics and order quantities depend on the component.
Price on request
Structured concept, usability, material and construction work through engineering, production release and lifecycle changes.
Price on request
Mechanical and electrical integration of keypads, displays, PCBA, cables, shielding, sealing and housing, with documented testing for the agreed assembly.
Price on request
Screen/digital printing, die-cutting, embossing, lamination and adhesive selection for overlays, labels and transfers; material and colour specification support is available.
Price on request
Die-cutting, forming, printing and adhesive application. PET can be laser cut; the comparison sheet discourages laser cutting PC and PP because of edge and heat effects.
Price on request
Manual and robotic welding of steel, stainless steel and aluminium assemblies.
Price on request
Group microturning with diameters 0.1–52 mm and length up to 500 mm. The stated ±0.002 mm capability is drawing- and material-dependent, not a universal tolerance.
Price on request
Screen printing and laser engraving of text, logos, serial numbers and QR codes on metal or plastic signs, with mounting and protective packaging options.
Price on request
OCA or LOCA bonding of suitable covers, capacitive layers and displays into the specified HMI construction.
Price on request
Fine contour etching up to 1 mm material thickness. The ±0.03 mm tolerance is conditional on the drawing, feature and material.
Price on request
Thin-wall metal and engineering-plastic machining with controlled fixtures and process conditions. Finish routes may include in-house work and partners; tolerances require component review.
Price on request
Proof of concept, material-stack design, process maturation, production introduction and lifecycle engineering for scalable printed sensors.
Price on request
Single- or double-sided roll-to-roll printing on PET, PC, PEN, non-woven and TPU.
Price on request
Sheet-metal fabrication with laser cutting, stamping and bending.
Price on request
In-house powder and wet painting, anodizing, screen printing and SurTec treatment are offered for suitable parts; other finishes and oversized paint jobs use external suppliers.
Connector/wire selection, routing, prototypes and production documentation for assemblies made through the group’s European facilities.
Transfer of an existing cable-assembly programme, equipment and documentation to the group network, with start-up and process-improvement support.
Partner sourcing and specification of displays, interfaces, touch, cover layers, readability and replacement options; optical bonding and final HMI assembly can be included.
Rigid PLA layout mock-ups, silicone samples from printed moulds for tactile evaluation and steel-tooled validation prototypes, selected according to the question being tested.
Design, tooling and process development for repeat metal production. Component carbon-footprint comparisons can support material and process choices; comparisons are specific to the modelled component and production route.
Concept, design verification, prototyping, production engineering and lifecycle support, scaled to the customer’s development needs.
Laser cutting in 0.05–1.5 mm sheet, with the stated ±0.01 mm capability subject to part review; bending, stamping, laser welding and engraving can complete the component.
Die/laser cutting, embossing, lamination and slitting to deliver sensors as rolls, sheets or finished parts. Electrical test and AOI form part of the agreed production quality plan.
LINAK
Automated coil deep drawing, punching and finishing for LINAK motor enclosures expanded with a second line and material-use improvements. Project calculations give 99 tonnes less material annually and 5.34% lower CO₂ per component.
CERN
Mekoprint developed and supplied thousands of shields for research equipment. Replacing the proposed bent foil with micro-milled aluminium allowed closed shielding geometry; prototype support and scheduled production deliveries are described.
Necas (EMS collaboration for a shared unnamed end customer)
Mekoprint and EMS partner Necas developed 3D-printed trays for two 0.3 mm shielding components supplied for a shared, unnamed end customer. Necas reports up to 90% less subsequent inspection/rework time; the result belongs to this project.
Firstkind
Double-sided, three-layer printed electrode foils are supplied on rolls for Firstkind’s further processing. Annual production was up to 500,000 sensors at the article’s publication in July 2024. Firstkind supplies the finished medical and sports devices.
Abena
Mekoprint co-developed and industrialized carbon-printed, laser-cut sensors on soft non-woven material using automated roll-to-roll production. Abena supplies the incontinence product and MediSens Wireless the cloud solution; Mekoprint supplies the sensor.
InviSense
Mekoprint produces the thin sensor using etched copper foil, silver circuit printing, lacquer, transfer tape and final punching. The ready-to-apply items support InviSense’s building-moisture measurement solution.
Kemppi
Mekoprint consolidated more than 200 keypad, overlay and label items, aligning materials, colours, drawings and specifications and arranging stock replenishment. The case covers membrane and silicone interfaces.
Grundfos
Mekoprint developed automated screen printing, adhesive application, embossing and die-cutting for pump overlays. Delivery on rolls supports automatic assembly at Grundfos’s Thailand production site; Mekoprint does not manufacture the pump.
Bioservo
Mekoprint engineered, prototyped and manufactured a wrist-mounted silicone keypad with bendable rigid-flex circuitry, sealing and a flexible wire assembly. Bioservo supplies the glove; the case describes the interface contribution.
Amazonen-Werke
Mekoprint proposed and developed a three-part silicone keypad for an agricultural control terminal, addressing tactile response, sunlight/night operation and environmental requirements. The customer supplies the terminal and machinery.
Krohne
Mekoprint supplied precision-punched and screen-printed instrument scales with customer tooling and a framework-order stock arrangement. No numerical print tolerance is stated. Krohne manufactures the flowmeter.
Danfoss Drives
Mekoprint Cables transferred a 70-item cable-assembly programme, equipment, tooling and documentation to its Polish factory. Material advice and process improvement continued after transfer. This is group production in Poland, not evidence of Danish factory output.
Framery
The Cables division developed four harness types forming an 8–10 m wiring solution for lighting, video, sound and ventilation in office pods. Production is expressly in Poland. Framery manufactures the pods; the Danish contracting entity is not specified.
Mekoprint specified and produced outdoor decals and nameboard graphics, including a digital-printing approach for consistent day/night appearance, mounting support and custom packaging for multiple sites. The truck manufacturer is unnamed.
MariCare
Mekoprint supported final design for manufacture and produces screen-printed, etched copper-clad sensor foils on rolls for MariCare’s subsequent production. MariCare supplies the finished Elsi Smart Floor system.
Mekoprint qualified silver traces down to 50 μm, helped redesign and qualify sensor lifetime, and introduced automated optical inspection and flying-probe electrical testing before mass production. Customer and finished appliance model are undisclosed.
ISO 9001:2015
DNV 05166-1999-AQ-DEN-DANAK, valid 1 December 2024–30 November 2027. Covers partner-based innovation and production of interfaces, graphics, printed electronics and metal solutions at the listed sites; separate subsidiaries require their own scope check.
ISO 14001:2015
DNV 05579-1999-AE-DEN-DANAK, valid 1 December 2024–30 November 2027, for the specified interface, graphics, printed-electronics and metal operations.
ISO 45001:2018
DNV 10000509765-MSC-DANAK-DNK, valid 28 November 2025–30 November 2027. The certificate and site appendix were reviewed; coverage is limited to the named operations and sites.
EN 1090-1 factory production control: Hornslet
DVS 2451-CPR-EN 1090-2020.0017.007 for structural steel components/kits to EXC3, Sletten 9, Hornslet. Issued 13 November 2025; next surveillance is stated as 29 January 2029. Validity remains conditional on the certificate requirements.
EN 1090-2 welding certificate: Hornslet
DVS ZERT-EN 1090-2-SZ-2024.0215.003, EN 1090-2:2018+A 1:2024 EXC3. Processes 135/141 and material groups 1.1/1.2; valid 13 November 2025–29 January 2029 under certificate conditions.
EN ISO 3834-2:2021: Hornslet
DVS D-ZE-16083-01-00-ISO 3834-2025.0355.001, valid 13 November 2025–29 January 2029. Industrial machining, welding and preparation of metal components, processes 135/141 and material groups 1.1/1.2.
Siemens: cable-division outsourcing reference
Named by Mekoprint among earlier cable-production outsourcing collaborations. Project scope, date and Danish contracting entity are not supplied on the reviewed page.
SMA Solar: cable-division outsourcing reference
Named by Mekoprint among earlier cable-production outsourcing collaborations. Project scope, date and Danish contracting entity are not supplied on the reviewed page.
Mekoprint A/S develops and supplies metal components, enclosures, EMI shielding, industrial graphics, human-machine interfaces and printed electronics. Its work spans customer-specific engineering, prototypes and series production, including integrated electromechanical assemblies. The portfolio also includes cable and harness solutions through the group’s European production network, microturning through Mekoprint Microturn, partner-sourced displays and distribution of Novotechnik sensors, Binder connectors and Dremec mounting hardware. These routes are distinguished from the Danish company’s own production. Technical limits, material grades and testing are agreed for the component and manufacturing site.
Cable assemblies and wiring harnesses
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. Mekoprint A/S has not reviewed or endorsed it.
Updated Sep 13, 2026
