Particle filtration and inserts
Offline fine filters and matched cellulose media for industrial oil maintenance.
View sourceOffline oil filtration, oil condition monitoring and lifecycle service
Private to you. Nothing is shared with C.C.JENSEN A/S automatically.
Offline fine filters and matched cellulose media for industrial oil maintenance.
View source
Coalescing separators and desorbers selected by oil chemistry and water phase.
View source
Special media and treatment units for oil degradation products and turbine control fluids.
View source
Sensor hardware, cloud monitoring and configured alarms for condition-based maintenance.
View source
Oil-specific configurations address hydraulic, gear, engine, fuel, turbine, transformer, quench and biodegradable-fluid applications.
View source
Original inserts, seals and maintenance accessories for the installed CJC system.
View sourceOngoing sensor-data analysis and warnings. Basic uses configured limits; Pro evaluates multiple signals statistically and summarizes oil/equipment condition. Subscription, connectivity and response responsibilities are specified for the installation.
View sourcePrice on request
Portable units for days, weeks or longer, selected for oil type and contamination; supports emergency cleaning, shutdowns, commissioning and temporary duty.
Price on request
Install/connect the configured CJC system, establish operating settings and support handover. Existing piping and electrical requirements are assessed for the actual machine.
Price on request
Foundation/advanced lubrication and oil-analysis courses, site-specific programmes and installation training. ICML certification preparation is distinct from examination and certification.
Price on request
Oil sampling, contamination measurements and interpretation support diagnosis, filtration selection and service recommendations.
Price on request
Oil analysis and system mapping establish oil type, volume, viscosity, temperature and contamination requirements for filtration sizing.
Price on request
Troubleshoot and repair filtration equipment or refurbish/upgrade units to extend useful service and adapt performance. Scope is agreed after assessment.
Price on request
Annual or scheduled checks, performance reviews, insert/seal servicing and written recommendations based on the installed system condition.
Temporary or installed offline treatment addresses contamination incidents, flushing and maintenance projects; sampling assesses whether oil condition is suitable for continued use.
Calibration support for sensors used to monitor oil systems.
TIRME
C.C.JENSEN reports installing VRU27/108 with VRi inserts on TIRME’s 15000 L turbine-oil system in Mallorca. MPC fell from 41.6 to 16.3 after 47 days and to 13.6 after two years; the account estimates an avoided €28000 oil change. The case is undated.
BHP Billiton, Minera Escondida (historical case)
The undated case reports HDU427/108 installation on a VG320 gyratory-crusher lubrication system at Minera Escondida, identifying the customer as BHP Billiton in its historical account. Annual oil use reportedly fell from 24000 to 4000 L, and oil-change shutdowns from six eight-hour events to one six-hour planned event.
Seadrill Management, as named in case
A partner-authored account describes two multistack PTU3 filter separators replacing centrifugal fuel treatment following an 8760-hour comparison. It reports 52560 L of annual MGO savings and 97.6% less sludge. The partner account is undated.
In a case prepared by C.C.JENSEN Inc USA with the Danish company, an unnamed tyre factory used HDU27/54 with GFi27/27 inserts on a roughly 3000 L VG680 Banbury gearbox. The account reports cleanliness improving from ISO 22/21/17 to 17/16/13 and oil remaining in service for more than six years. The customer and installation date are not identified.
ISO 9001:2015
FORCE certificate FC-9001-20139-1 names C.C.Jensen A/S at Løvholmen 9–13, Svendborg, for sales, production and development of oil-maintenance and control units. Valid 8 September 2025–18 October 2028. The referenced location enclosure is absent, so no additional site scope is established.
Lloyd’s Register design appraisals for specified CJC units
Lloyd’s Register design appraisals name CC Jensen A/S, Svendborg: PTU15/25 issued 15 June 2025; PTU1/2/3 issued 18 February 2026; HDU15/25 and HDU27 issued 4 May 2026; HDU427 issued 5 May 2026. Each lasts five years or until rule change, whichever comes first, with delivered-item acceptance conditional on survey/testing. Design limits vary by model.
Anglo American, South Africa
Filter Separator 27/108 for crusher lubrication. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceNedschroef Altena GmbH
PTU1 27/108 treatment of oil from a quench-washing bath. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceGulf Offshore Norway
PTU2 27/27 filtration on the North Truck supply vessel. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceC.N. Vandellós II, Tarragona
PTU3 5×27/108 filtration for the main turbine. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceMaersk Supply Service, Denmark
Oil-filter testimonial. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceStudstrupværket, Elsam, Denmark
Oil filters on eight coal mills. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceWindward Energy, USA
Wind-turbine oil-filter testimonial. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceBHP Billiton Iron Ore, Australia
Crusher-oil contamination reduction. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceRUFFINI, S.A., Spain
Oil filtration on injection machines. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceNorske Skogindustrier ASA, Norway
Desorber water-removal equipment. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceTMS-Dry, Greece
Desorber/filter combination used to remove water from stern-tube oil. Historical customer testimonial; engagement date and current relationship are unspecified.
View sourceC.C.JENSEN A/S develops and manufactures CJC offline oil-filtration systems and filter inserts in Denmark, with headquarters in Svendborg. Its equipment maintains hydraulic, gear, engine, turbine and other industrial oils through particle filtration, water removal, varnish control and acidity treatment. Buyers can obtain application engineering, installation, oil-cleaning projects, rental equipment, monitoring, maintenance and training through its international service network. The separate Casting and Window subsidiaries are outside this filtration profile. Food-grade and pharmaceutical process oils are excluded from the service scope.
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. C.C.JENSEN A/S has not reviewed or endorsed it.
Updated Sep 13, 2026
