Aluminium stock and custom profiles
Rolled and extruded material, profile systems, fittings and architectural products.
View sourceMetal stock, cut-to-size processing and custom component supply
Private to you. Nothing is shared with Alumeco ApS automatically.
Rolled and extruded material, profile systems, fittings and architectural products.
View source
Semi-finished stock, conductors, refrigeration tubing and special copper alloys.
View source
Speciality stock and piping material, including inquiry-based supply.
View source
Category-specific sawing, coil cutting, buffer stock, packing and call-off logistics.
View source
Material advice, drawings, prototypes, coordinated processing, kitting and extra documentation.
View sourcePrice on request
Development prototypes in plastic produced in-house and in metal through subcontractors.
Price on request
Storage of purchased or customer-specific material and planned release in required quantities, with shipment arrangements through the logistics network.
Price on request
Sheet cut to customer lengths at Alumeco’s own coil centre. Published range: width 500–1600 mm, length up to 6000 mm, thickness 0.5–4 mm.
Price on request
Consolidation of components from suppliers into kits packed in assembly order for the customer’s production line, including busbar solutions.
Price on request
Coordination of specialist manufacturers for custom extrusion and specified machining, surface treatment and assembly, with supply-chain planning through to delivery. These processes are not all claimed as in-house.
Price on request
Sawing sheet, plate, blocks, bars, profiles, rings and discs to requested dimensions.
Price on request
Technical advice on alloys and manufacturability, drawings and development dialogue for custom aluminium profiles and copper components.
Price on request
Packing in customer packaging or for road, sea or air shipment according to the material and handling requirements.
Fischer Group
Metal prototypes supported the later stages of roller-blind development, but the printing process could not faithfully reproduce the small pin channels.
SKANDI-BO
Alumeco-supported testing and transition to scrap-based aluminium profiles for glass-wall and door frames, including checks for extrusion, strength and anodising performance.
AE Stålmontage
Supplied 6000 m² (60 tonnes) of untreated EN AW-5754 H22 sheet to AE Stålmontage for the Bella Arena facade. AE Stålmontage performed fabrication and installation. The building’s DGNB certification applies to the building, not Alumeco.
NASSAU Door A/S
Used Alumeco 3D prototypes to compare designs before manufacturing extrusion tooling.
ISO 9001:2015
Bureau Veritas DK017713 v3, issued 5 August 2025, cycle 23 March 2024–22 March 2027; original 23 March 2012. Odense annex scope: purchase/sale of aluminium, sawing/clipping aluminium, copper and brass, and warehousing/logistics. Wind-hardware design belongs to separate AluWind annex entry. Subject to continued satisfactory management-system operation.
ISO 14001:2015
Bureau Veritas DK017712 v3, issued 5 August 2025, cycle 23 March 2024–22 March 2027; original 23 March 2021. Odense scope covers aluminium purchase/sale, aluminium/copper/brass sawing and clipping, and warehouse/logistics; other subsidiary scopes are separate.
ISO 45001:2018
Bureau Veritas DK020348 v1, issued 13 May 2026, cycle 12 June 2026–11 June 2029; original 12 June 2023. Odense scope covers aluminium, copper and brass purchase/sale, sawing/clipping, and warehouse/logistics. Additional Coswig and AluWind scopes do not broaden this profile.
Alumeco supplies aluminium, stainless steel, copper, brass, bronze, titanium and copper-nickel material to industrial buyers. Its range covers sheet, plate, bars, coils, tubes, profiles and fittings, alongside custom aluminium extrusions, copper busbars and architectural aluminium. Odense services include cut-to-size sawing, coil cut-to-length, stockholding and tailored packing. Technical advice, drawings, prototypes, sourcing and kit delivery support custom projects; specialist partners provide extrusion, metal printing and other processing where applicable.
Metal coils & strip
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. Alumeco ApS has not reviewed or endorsed it.
Updated Sep 13, 2026
